FENIX GARAGE DOOR

MODEL 200

Other Options:
	Reserved curtain for exterior mounting
	Slope strip (for sloped floors)
	Hoods/facia panels
	Dead bolt locks for wicket doors
	Available in 3 colors: white/tan/brown
	Contact us for other options

MODEL 300

Other Options:
	Inverted curtain for exterior mounting
	Slope strip (for sloped floors)
	Hoods/facial  panels
	Dead bolt locks for wicket doors
	Insulation
	Powder Coating
	Single piece wind-lock guides available
	Contact factory for other options available

MODEL 400

Other Options:
	Dead bolt locks for wicket doors and pass doors
	Inverted curtain for exterior mounting
	Slope strip (for sloped floors)
	Powder coating available
	Cylinder lock
	Cast iron endlocks/windlocks
	Higher than 20 P.S.F. wind loading available
	High cycle option 150,000 cycles
	Electric interlocks

MODEL 500

MODEL 200         Specifications pdf

ORIGINAL SHEET DOOR

 

Porvene's 300 Series Commercial Slat Doors
offer the economy of a sheet door with the added
strength of a service door. This Model is available
with 24 Gauge or 22 Gauge steel slat curtain
(some sizes available in 24 gauge only) and can
be Wind - locked. This complete product line
comes standard with chain operation and can be
upgraded to electric operation.
Standard Features:

1. Sealed Ball Bearings
   Self-aligning and allow lasting free
   rotation.
   
   
2. Drum Assembly
   The counter balancing mechanism is
   housed in this unique, roll-up assembly,
   forming a self enclosed hood.
   
   
3. Steel Slat Curtain
   All slats are manufactured from the
   highest quality galvanized steel with a
   baked enamel finish, to form an effective
   secure curtain.
   Available curved or flat. (Available in 24 or
   22 gauge.)
   
   
4. Bottom Bar
   Full length structural steel angle with
   blade astragal. The blade astragal forms a
   barrier against weather, dirt, insects and
   rodents. Slide bolt lock can accommodate
   padlocks.
   
   
5. Guides
   Structural steel wall angle with galvanized
   roll-form U-Channel guides.
   
   
6. Chain Operation
   Reduction Drive standard on all doors.
   Smooth hand-chain provides safe and
   comfortable operation eliminating the
   sharp edges common to lock link hand
   chain.
   
   
7. Vision Lites ( windows )
   For viewing convenience. (optional)
   
   

MODEL 400        Specifications pdf

THE ROLLING STEEL SERVICE DOOR

 

Porvene's 400 Series Service Doors offer
24/22/20/18 gauge slats for additional strength.
Our new and innovative slat design reduces the
snapping sounds that come from metal to metal
contact common to rolling steel slat doors when
the door is opening and closing. Powder Coating
in a wide variety of colors is also available. This
product line comes standard with Chain
Operation and can be upgraded to Electric
Operation.
Standard Features:

1. Steel Slat Curtain
   All slats are manufactured from the
   highest quality galvanized steel with a
   baked enamel prime finish. Available in 18
   ga., 20 ga., 22 ga., or 24 ga. flat or curved
   slat.
   
   
2. Guides
   Minimum 3/16" structural steel angle. (roll
   formed guides on 24 gauge doors up to
   14.0"x14.0".)
   
   
3. Bottom Bar
   Two 2" x 2" x 1/8" thick structural steel
   angles form a rugged bottom bar
   assembly. A rubber bottom astragal helps
   to conform to floor irregularities and helps
   guard against weather, dirt, insects and
   rodents.
   
   
4. Pipe Barrel
   Continuous 6" minimum diameter pipe to
   support curtain with no more than .03" of
   deflection per foot of width.
   
   
5. Counterbalance
   Helical torsion springs are oil tempered
   and grease packed. Springs are designed
   for 20,000 cycles minimum and are
   accurately calculated for every door using
   Porvene's uniquely designed "Door
   Dynamometer".
   
   
6. Door Stops
   Stops are located on the inside and
   outside of the guides for added safety.
   
   
7. Hood
   24 Gauge galvanized steel with a baked
   enamel prime finish hood that forms an
   enclosure at the top of the door.
   
   
8. Chain Hoist
   Heavy duty #50 roller chain and sprockets
   combined with a smooth hand-chain
   provides for safe and efficient operation.
   Removal of chain hoist makes door
   Electric Operation ready without further
   modification or cost.
   
   
9. Sealed Ball Bearing
   Self-aligning and allow free rotation of
   barrel.
   

 

Porvene's 500 Series Quiet Glide Grille is
constructed using Aluminum tubes over solid
steel rods giving added strength for security and
features low friction nylon blocks mounted to the
bottom bar for quiet operation. Clear anodized
finish is standard on the guides, bottom bar and
round tubes. Available anodized finishes are
Gold, Dark Bronze, Light Bronze and Black. The
complete line is available, dependent on size, as
Hand Operation or Chain Operation and can be
upgraded to Electric Operation.
Standard Features:

1. Grille Curtain
   Clear anodized aluminum tubes over steel
   rods for added strength and security.
   
   
2. Guides
   Clear anodized extruded aluminum with
   polyethylene wear strips for smooth
   operation.
   
   
3. Bottom Bar
   clear anodized aluminum with low friction
   nylon blocks mounted at ends for smooth
   and quiet operation.
   
   
4. Locking
   Center mounted key cylinder lock
   operable from inside or outside (optional).
   
   
5. Hood
   24 gauge galvanized steel painted hood
   (optional).
   
   
6. Counterbalance
   Helical torsion springs calculated for
   optimal ease of operation.

MODEL 600              Specifications pdf

SERVICE DOOR ROLLING STEEL INSULATED